• Filtration to 7200 GPH
  (27,254 LPH)
  
• Filters Corrosive liquids down to .5 micron at temperatures to 200°F (93 °C)
  
• CPVC Construction to 200°F (93°C),PVC to 140°F (60°C), Kynar to 210°F (99°C)
  
• Chamber pressure to
  60 PSI at 73°F (23°C)
  (derate as temperature increases). For higher pressures or temperatures, consult factory.
  
• Wide selection of media
  – Cartridge (poly or cotton)
  – Pleated (high surface area)
  – Carbon/filter tubes
  – (see Filter Bags, Cartridges, & Media section)

Cartridge Filtering Systems
Complete systems include a pump and motor, chamber, cartridges, inlet and discharge hoses and all accessories required to set up and operate the system. All systems (except with ZDX Series pumps) are mounted on a corrosion resistant rigid plastic panel on rubber tire/ball bearing casters or rubber feet, depending on model. Chamber models D-30 through D-3612
are provided with a coated steel base unless customer requests tank
flange mount.

Applications
Sethco Cartridge Filter chambers and Systems are engineered to provide economical removal of foreign particulates from a wide range of chemical solutions including most metal finishing applications. When properly equipped they are suitable for chrome plating solutions as well as electroless copper and electroless nickel, to 200°F (93°C). Always advise Mefiag of your application when ordering.